蓝威船舶
蓝威船舶
蓝威船舶
蓝威船舶
/
/
-
Code for design of steel structure industrial building

News

Code for design of steel structure industrial building

2019-11-26 08:34

The design standard of the steel structure industrial workshop is based on the structure of the workshop. The design of the workshop is decided according to the technological process and the production condition, and the form of the workshop is decided. 

Code for design of standard workshop

First, the industrial plant design must implement the relevant national policies and regulations, so that the technology is advanced, economic, reasonable, safe, applicable and ensure quality, in line with energy conservation and environmental protection requirements.   

Two. This specification applies to the design of new and converted and expanded industrial plants, but does not apply to biological cleaning rooms that are controlled by bacteria. The provisions of this code relating to fire prevention, evacuation and fire protection facilities are not applicable to the design of high-rise industrial buildings and underground industrial buildings with a height of more than 24 meters.   

Three, in the use of existing buildings for clean technical transformation, industrial workshop design must be based on the production process requirements, according to local conditions, and different treatment, make full use of existing technical facilities.

Four. The design of an industrial building shall create the necessary conditions for construction, installation, maintenance, management, testing and safe operation. 

Five, the design of industrial buildings should be carried out in accordance with this standard, but should meet the requirements of the current national standards and specifications. 

Six, the industrial workshop is built by an independent building (workshop), and an independent building (dormitory), the distance between the two buildings is 10 meters, not less than 5 meters recently, so as to eliminate the acceptance of qualified. The proportion of the building area to the floor area is 1:3.

Standard for design of steel structure workshop

In order to achieve the standardization and serialization of the geometric dimensions of the main structural parts of the steel structure, plant and building, in order to facilitate industrial production, this standard is specially designed.

This standard applies to:

Design, assembly or partial assembly of reinforced concrete structure and mixed structure workshop;

Two. Draw up the atlas of standard design of building construction parts and fittings.

Note: the design of steel structure workshop, limited by the condition changed (expanded) construction of the plant, cast-in-situ reinforced concrete structure workshop, special requirements of the process plant design or in accordance with this standard in technology and economy will produce significant unreasonable plant to plant, some provisions can not implement the standard; the the workshop of the new technology, new structure and new materials, not subject to certain provisions of this standard limit.

In a construction site, when determining the design of each plant, it is advisable to unify the types of structural fittings.

On the basis of technology, economy and rationality, the shape of the workshop should be simple, and the height difference between vertical and horizontal span and multi span workshop should be avoided.

When compiling the atlas of standard design of building construction components and fittings, the same components shall be used with the utmost interchangeability.

In addition to the relevant provisions of this standard, the plant building design shall also comply with the current relevant national standards.

页脚联系我们

Time of issue:2019-06-26 00:00:00
tel

联系热线:
086-0311-85297479

传真:0311-89911978
地址:河北省石家庄赵县韩村镇

 

新闻资讯

公司新闻

行业动态

技术资料

联系我们

erweima

COPYRIGHT © 2017 HEBEI ZHAO HONG STEEL STRUCTURE CO., LTD. ALL RIGHTS RESERVED.